Eurocom Panther 5D - Manual (Page 31)

25
Engl
ish
PC Camera
Before installing the PC Camera driver, make sure the PC
Camera module is powered on. Use the Fn + F10 key
combination
or touch sensor instant key to toggle pow-
er to the PC Camera module. When the PC Camera mod-
ule is powered on, the
LED will be highighted and the
on-screen visual indicator will briefly be displayed.
PC Camera Driver Installation
1. Click Option Drivers (button).
2. Click 1.Install WebCam Driver > Yes.
3. Click Finish to restart the computer.
OR
Click Next > Finish.
4. Run the camera application from the desktop shortcut
(if the hardware is turned off use the Fn + F10 key
combination or touch sensor instant key
to turn it on
again).
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it
is necessary to setup the audio recording options in Win-
dows.
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Sound (Hardware and Sound).
3. Click Recording (tab).
4. Right-click Microphone (Realtek High Definition Audio) and
make sure the item is not disabled.
5. Double-click Microphone (or select Properties from the right-
click menu).
6. Click Levels (tab), and adjust the Microphone and
Microphone Boost sliders to the level required.
7. Click OK and close the control panels.
8. Run the camera application from the desktop shortcut.
9. Go to the Devices menu heading and select Microphone
(Realtek....) (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it
should have a tick alongside it).
11. To obtain the best sound recording quality enable Noise
Supression in the Realtek HD Audio Manager control panel
(see
"Setup for Audio Recording" on page 21 ).