EXFO AXS-100 Series OTDR - Manual (Page 71)

Managing Test Results
OTDR 63
Opening Trace Files
Opening Trace Files
You can open a maximum of two files at a time: a main trace and a
reference trace (if the corresponding feature is selected).
Your unit can display traces saved in native (.trc) and Bellcore (.sor)
formats.
To open trace files:
1. Press Menu, select OTDR, and then press Enter.
2. Use the left/right function arrows until you
see Open, then display the pane (F1/F2 key).
3. If you enabled the reference trace feature
(see Setting General OTDR Parameters on
page 24), use the up/down arrows to select
the selection button corresponding to the
desired trace. Press Enter to view the
browser.
Note: If desired, press New Folder to create folders (for more information,
see Creating Folders on page 66).
4. Use the up/down arrows to navigate in the
list. Use the right arrow to open a folder.
Highlight the desired file and press Open
(F1/F2 key).
5. If you enabled the reference trace feature,
repeat steps 3 and 4 with the other file.