EXFO FTB-7000 OTDR for FTB-200 v2 - Manual (Page 197)

Creating Reports
OTDR 183
Generating a Report
To clear all the information from the Report window:
Press the Clear All button.
Note: The information appearing in the Date, Time, Unit, and Serial no. boxes
cannot be deleted. The Fiber ID can only be deleted if the Use autonaming
feature is not selected.
Generating a Report
You can print trace reports directly from your unit.By default, only the
information related to the active trace is printed in a report, but you can
also print all the traces the current file contains (available in Advanced and
Auto modes only). In Template mode, only the current trace will be
printed.The following table shows the various items that can appear on a
report, depending on the test mode (Auto, Advanced or Template) that is
selected.
Item appearing on the report
Auto
mode
Advanced
mode
Template
mode
Summary table: a single table containing the pass/fail
status, the span loss and span ORL for all the
wavelengths.
By default, this item is selected.
X X