EXFO MAX-710-P - Manual (Page 19)

Introducing the MAX-700
MAX-700 7
Trace Acquisition Modes
Trace Acquisition Modes
The OTDR application provides the following trace acquisition modes:

Auto: Automatically calculates fiber length, sets acquisition
parameters, acquires traces, and displays event tables and acquired
traces.

Advanced: Offers all the tools needed to perform integral OTDR tests
and measurements and gives you control over all test parameters.

Fault Finder: Rapidly locates fiber ends and displays the length of the
fiber under test. This allows you to perform quick tests without having
to set all the acquisition parameters.
Optional Software Package
An optional software package is offered with the application.
With the optional Auto Diagnostic (AD) software package you can:

Have access to the “linear view”, which displays the events
sequentially, from left to right.

Find macrobends and view the related information.

View the summary table, which gives, for each wavelength, the global
status of the results, the span loss and span ORL values.

Test in Fault Finder mode, to rapidly locate fiber ends.
Data Post-Processing
To view and analyze traces without the MAX-700 use a computer onto
which FastReporter is already installed.