Daewoo L710T - Manual (Page 13)

Menu Installation
Key Process for TV mode
Press the MENU button on the Remote controller.
This will bring up the OSD.
Here, with INSTALL highlighted, you can make the
changes necessary to configure the TV options available
such as searching for channels, tuning channels, naming
channels and editing those channels.
The four directional arrows on the Remote will navigate the
OSD. When making changes, a right-arrow movement will
select it (changing it to RED) and subsequent right-arrow
depressions will move through the available options in that
range.
Press MENU to confirm the change (the selection will
change back to BLACK) and then press Menu again to
advance the OSD backward to the main menu (and again
to close the Menu altogether).
AUTO SEARCH allows you to select the country from
where you are receiving transmissions and then search for
channels in your area.
After selecting MENU press the right-arrow button (VOL+)
to highlight Auto search and then again to highlight the
country code (this will change the country code to RED).
Press the right-arrow button to select your country code.
Now press the OK button to commence channel searching
(see pic).
When this function has been completed all the channels
found will be available, but not in the correct order and will
not be named. This has to be conducted in the Edit
Channel selection (see next page).
OK button
9