Daewoo L710T - Manual (Page 19)

Menu installation
Key Process for PC mode
Press the MENU button on the Remote controller.
This will bring up the OSD.
OSD MENU has a LANGUAGE OSD setting. Once
highlighted, press OK. A selection of Languages are
selectable: English, French, Dutch, Spain, Italian and
Korean.
OSD H POS and OSD V POS re-positions the OSD on the
LCD display.
OSD TIMER when ON, turns of the OSD in 15 seconds of
inactivity. In an OFF state, the OSD will remain until the
MENU button is pressed (more than once if necessary).
TRANSLUCENT changes the level of transparency of the
OSD to the background.
Press the MENU button on the Remote controller.
This will bring up the OSD.
MISC. has a SIGNAL SOURCE setting which gives you the
control to set the default Signal Source on power-up (press
the MENU).
PICTURE MODE provides three settings: PC, GAME,
MOVIE; each one adjusts the display to suite whatever type
of mode the LCD monitor is being used for.
RESET restores the factory default settings. Arrow-right
(NO will be highlighted RED). Arrow-left, YES will be
highlighted RED. Press OK.
The screen will go blank and then reset. NO SIGNAL will
appear and then if a PC connection is still present, it will
return with default settings in a few seconds.
Press the MENU button on the Remote controller.
This will bring up the OSD.
SOUND on and Sound off enables or disables the inbuilt
speakers on the LCD monitor.
VOLUME adjusts the sound (whether enabled or disabled).
15