EXFO IQS-9100B Optical Switch for IQS-500/600 - Manual (Page 40)

Operating the Optical Switch
34 IQS-9100/9100B
Selecting Configurations with the 2 x 2 Model (IQS-9100 Optical Switch only)
Selecting Configurations with the 2 x 2 Model
(IQS-9100 Optical Switch only)
The 2 x 2 optical switch model offers two configurations:

Bypass mode

Insert mode
To select a configuration with the 2 x 2 optical switch model:

Click Bypass Mode or Insert Mode, according to the configuration you
want to use.
You can also select a configuration from the QuickTools utility. For details,
see Monitoring Optical Switch Modules on page 47.
Note: For the 2 x 2 model, the Continuity function is not available in the Control
Center.