EXFO IQS-9100B Optical Switch for IQS-500/600 - Manual (Page 77)

SCPI Command Reference
Optical Switch 71
Product-Specific Commands—Description
Product-Specific Commands—Description
:ROUTe[1..n]:CLOSe
Description This command positions the optical switch to the
reset position. In this position, there is no optical
continuity.
*RST has no effect on this command.
Syntax :ROUTe[1..n]:CLOSe
Parameter(s) None
Example(s) ROUT:CLOSE
Notes For all switches except: 1x2, 2x2, and 2x4.
See Also ROUTe[1..n]:OPEN
ROUTe[1..n]:OPEN:STATe?