EZ-ACCESS PASSPORT User Manual
EZ-ACCESS Health and hygiene
PASSPORT® Vertical Platform Lift
Technical Specifications
12866 01-20-14
© 2013-2014 EZ-ACCESS, a division of Homecare Products, Inc. All rights reserved
All text and/or images contained in this document are proprietary and may not be shared, modified, distributed,
reproduced or reused without the express written permission of Homecare Products, Inc.
MODEL #:
PL52SP3651
PL52TP3860
PL72SP3651
PL72TP3860
TOWER WEIGHT:
216 lbs (98 kg)
216 lbs (98 kg)
247 lbs (112 kg)
247 lbs (112 kg)
PLATFORM WEIGHT:
168 lbs (76 kg)
160 lbs (73 kg)
168 lbs (76 kg)
160 lbs (73 kg)
NET WEIGHT:
384 lbs (175 kg)
376 lbs (171 kg)
415 lbs (189 kg)
407 lbs (185 kg)
TOWER HEIGHT WITH LEGS:
76-1/8” (1931 mm)
76-1/8” (1931 mm)
96-1/8” (2439 mm)
96-1/8” (2439 mm)
TOWER WIDTH WITH LEGS:
33-3/8” (84 cm)
33-3/8” (84 cm)
33-3/8” (84 cm)
33-3/8” (84 cm)
HEIGHT AT MAXIMUM TRAVEL:
97-9/16” (2464 mm)
97-9/16” (2464 mm)
117.75” (2997 mm)
117.75” (2997 mm)
PLATFORM “USEABLE” SIZE:
50.75” x 36”
(1289 mm x 914 mm)
59.75” x 38”
(1518 mm x 914 mm)
50.75” x 36”
(1289 mm x 914 mm)
59.75” x 38”
(1518 mm x 914 mm)
FOOTPRINT (RAMP DEPLOYED):
SEE “DIMENSIONS” SECTION ALSO
76" X 52"
(1930 mm x 1320 mm)
85" X 52"
(2159 mm x 1320 mm)
76" X 52"
(1930 mm x 1320 mm)
85" X 52"
(2159 mm x 1320 mm)
LIFTING HEIGHT:
52” (1231 mm)
landing-to-landing
52” (1231 mm)
landing-to-landing
72” (1828.8 mm)
landing-to-landing
72” (1828.8 mm)
landing-to-landing
NOTE: Weights and dimensions are approximate and subject to change.
PERFORMANCE STANDARDS:
B44.1 / ASME A17.5, ASME 18.1-2008 (Sec 5)
MAXIMUM RATED LOAD:
750 lbs. (340 kg)
NUMBER OF PASSENGERS:
Two (one occupant with mobility device, plus one caregiver). Not to exceed Maximum Rated Load
MAIN DRIVE ELECTRICAL:
24 VDC supplied by two 12 VDC-12 Ah sealed lead-acid batteries, 2 amp smart charger
CONTROL CIRCUIT ELECTRICAL:
12 VDC
AC INPUT:
120 VAC, .6 amps
AC POWER CORD LENGTH:
12-ft. (3.7 m)
PRIMARY DRIVE:
24 VDC worm drive; .58 hp; 28:1 reduction ratio; 96 rpm output speed rating
FINAL DRIVE:
1” diameter Hi-lead ® drive screw with bronze nut and bronze safety back-up nut
DRIVE MOTOR CONTROL:
24 VDC reversing relay, 12 VDC control input, 30-amp auto reset circuit breaker
BRAKING:
Worm drive gear motor
STANDARD INTERFACE CONTROLS:
12 VDC; separate, continuous, low pressure large mushroom-head control switches for “UP/DOWN”
operation; onboard LED indicator lights, including diagnostics for quick and easy reference; user adjustable
control box; keyed operation
EMERGENCY STOP:
Red, sealed, 1.5” diameter mushroom-head, push button
PLATFORM TRAVEL SPEED:
10 ft/min
NUMBER OF STOPS/LANDINGS:
Two stops (upper and lower landings)
TOWER CONSTRUCTION:
Welded aluminum extrusion with powder coated structural steel base legs
CARRIAGE CONSTRUCTION:
Welded aluminum, 1.9” (48.3 mm) MDS nylon 6/6 rollers, and UHMW polyethylene low friction buffers
PLATFORM CONSTRUCTION:
Welded aluminum, totally enclosed, removable aluminum framed side enclosures with coated steel filler
panels
UNDER PLATFORM SAFETY:
Formed aluminum safety pan with obstruction detectors, designed to stop lift upon contact with an obstacle.
Takes less than 15 lbs. (6.8 kg) of pressure to activate safety pan stop
GUARD RAMP:
Self-actuating 24” (610 mm)
EMERGENCY LOWERING:
Manual hand-crank lowering capability
LIMIT SWITCHES:
Upper and lower primary and secondary limit switch triggering locations are adjustable via movable cams
WEIGHT OF TOP LANDING GATE:
50 lbs. (23 kg)
FLOOR ATTACHMENT:
Anchor-ready powder coated structural steel legs (concrete anchors not included)
MOUNTING SURFACE RECOMMENDED:
A level,
≥ 3,500 psi concrete pad with a 4” minimum thickness
DRIVE SCREW LUBRICATION:
Chevron Ulti-plex® Synthetic Grease EP, NLGI Grade 1.5 (or equivalent)