Datacom Systems J Class - Manual (Page 193)

A-5
•
Stand on a static-free mat.
•
Wear a static strap to ensure that any accumulated electrostatic
charge is discharged from your body to ground.
•
Connect all equipment together, including the static-free mat,
static strap, routing nodes, and peripheral units.
•
Keep uninstalled printed circuit boards in their protective anti-
static bags.
•
Handle printed circuit boards by their edges, once you have re-
moved them from their protective antistatic bags.
(For workstations that have a CD ROM drive installed.)
The CD-ROM mass storage system is certified as a Class 1 laser
product under the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation
Control for Health and Safety Act of 1968.
This means that the mass storage system does not produce hazardous
laser radiation. Because laser light emitted inside the mass storage
system is completely confined within protective housings and exter-
nal covers, the laser beam cannot escape from the machine during any
phase of user operation.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
Laser Safety
Statement (For
U.S.A. Only)
IEC 825 Class 1
Laser Label