Datacom Systems J Class - Manual (Page 63)

3-4
Table 6–1. CD-ROM Drive Operating Controls and Features
You can plug mini-headphones with a 3.5 mm diame-
ter miniature stereo plug into this jack.
Use the volume control to adjust the audio output vol-
ume to the headphone jack.
The Busy Indicator lights during a data access opera-
tion and blinks during a data transfer. The indicator
blinks initially and then stays lit when there is one of
the following:
S A defective disc
S A disc insertion error
(for example, an upside-down disc)
S No disc present
Press the Eject Button to open the Disc Tray and in-
sert or remove a disc. When the drive is in use, you
must press the eject button for more than one second
to open the Disc Tray.
By removing the Phillips type screw and inserting the
end of a paper clip, you can open the Disc Tray when
the workstation does not have power.
The disc tray holds the CD-ROM disc. This style of
CD-ROM drive does not use a disc caddy. The disc
tray does not open if the workstation power is off.
Control/Feature Purpose
NOTICE: The Volume Control, Headphone Jack, and Audio Jack
features of the CD-ROM drive are supported through
applications only.
Headphone Jack
Volume Control
Busy Indicator
Eject Button
Emergency Eject
Disc Tray