FeiYu Tech FY-Panda2 Autopilot - Manual (Page 43)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 42
5) After read the current parameters, you can configure the channel . In the
channel drop-down menu to select the channel which you need to configure.
6) Click on the "SET", underside column will indicate the parameter setting
success. After setting success, you can close the dialog box directly .
Considerations For Data Radio Setting
1) Only in the same channel , the data radio can communicate with each other.
2) Because the Data Radio via USB-TTL data cable to power on the Data Radio
will immediately into work state when it power on, so the antenna should be installed
before the USB-TTL data cable connected to the computer, in order to avoid Data Radio
frequency power amplifier circuit part overheat and burn out
3) When you select the Data Radio setting ,the connection port of the GCS will
close automatically , if you want to use the GCS software again ,please click the
―connect ‖ button for reconnection after finish the data radio setting .
11.11 Read POS Data
PandaⅡ has already built-in POS information record module, the POS information
record module has 4M storage space, it will automatically record photo-taken Pos