FeiYu Tech FY-41AP - Manual (Page 21)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
- 21 -
RC setting
FY-41AP requires a minimum of 5-channel RC receiver.
1. First, the remote control is set to fixed-wing aircraft of conventional layout mode, do
not set any mixing. The rudder angle of the remote control is set to 100%, and
fine-tunes gyrus.
2. Need a three-position switch or rotary switch settings for CH5 used to connect
SW1. Used to switch the flight mode.
3. After the connection is complete, call CH5 to check if the settings are in correct
control mode, the status of the lights, or OSD display mode to confirm.