FeiYu Tech FY-DOS - Manual (Page 12)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected] Page 12
Initialization / Reset Process:
1,power on and keep stationary.
2,switch to ABM.
3,On SW1,switch ABM to Deactivated Mode 6 times, time interval has to be less than 3 seconds as follows:
ABM→ Deactivated Mode → ABM → Deactivated Mode → ABM → Deactivated Mode → ABM → Deactivated
Mode → ABM → Deactivated Mode → ABM → Deactivated Mode.
4,DoS indicator will flash white about one second.
5,After white lamp lights off, the re-setting / initialization is complete.
(If you connect a DoS setup software, you can initialize it by click "Init GYRO" button.)
16. DoS Setting Software:
connection mode:
First need install USB-TTL device driver, you can download it form our website: www.feiyudz.cn
Software Interface Description:( Parameter in the following picture is default parameter )
USB Cable