FeiYu Tech FY-91Q - Manual (Page 11)

GuiLin FeiYu Electronic Technology Co., Ltd
GuiLin FeiYu Electronic Technology Co., Ltd www.feiyudz.cn E-mail: [email protected]
Page 10
GND Null
P1
P2
GND Power TX0 RX0 I
ESC4 ESC3
ESC2
ESC1 GND Power TX1 TX1 II
Null Null Null
Power
Input
Rx free
channel
(Switch
1)
Rx Rud
(Ch 4)
Rx Throttle
(Ch 3)
Rx Ele
(Ch 2)
III
GND GND GND GND GND Power
Rx AIL
(Ch 1)
No Pin IV
Null : Do not connect anything on these pins (leave open).
Dip Switch Setting
The FY-91Q utilizes a Dip Switch system for model selection, via Dip switch No. 2 to
No.4:
Switch Position 1 2 3 4
ON (Factory use only)
Flight mode
debugging
X-format Y6 flight mode
OFF Always OFF
Normal flight
mode
Cross format X4 flight mode
Note: SW3 can be switched to any position when in Y6 flight mode.
Switch Diagram Reference: the switches below are in the OFF POSITION:
Example:
1 2 3 4
OFF
ON