Hoisting, Jump starting – Dodge 2009 Ram Chassis Cab User Manual

Page 328

Advertising
background image

To Stow The Flat Or Spare — If Equipped
Refer to Upfitters Body Builders Guide for information
on stowing your spare tire (if equipped).

HOISTING
A conventional floor jack may be used at the jacking
locations. Refer to the graphics that show jacking loca-
tions. However, a floor jack or frame hoist must never be
used on any other parts or the underbody.

CAUTION!

Never use a floor jack directly under the differential
housing of a loaded truck or damage to your vehicle
may result.

JUMP STARTING

WARNING!

To prevent personal injury or damage to clothing,

do not allow battery fluid to contact eyes, skin or
fabrics. Do not lean over a battery when connect-
ing jumper cables or allow cable clamps to touch
each other. Keep open flames or sparks away from
battery vent holes. Always wear eye protection
when working with batteries.

Do not use a booster battery or any other booster

source that has a greater than 12-Volt system, i.e.,
do not use a 24-Volt power source.

NOTE:

Replacement batteries should both be of equal

size to prevent damage to the vehicle’s charging system.

326

WHAT TO DO IN EMERGENCIES

Advertising