Installation – Glow-worm Clearly Hybrid - Universal Module User Manual
Page 11
0020096324_01.1 - 09/10 - Glow-worm
- 9 -
6.2.2
Heat pump circuit design
Installation pipework must be designed and installed to ensure
venting of air from the system is possible.
b
Insulate the pipes with a UV- and high-
temperature-resistant insulation.
6.3 Dimensions
Hydraulic module
418
370
890
i
Dry weight : 32 kg
Filled weight : 42 kg
6.4 Mounting
i
Depending on the installation, you may install the
frame supplied with the appliance.
• Make sure that the equipment used for implementing the
installation is compatible with that of the appliance.
• Determine the assembly location. See the "Appliance
location" chapter.
• Always ensure that the wall to which the appliance is being
installed is capable of supporting the weight when fi lled
.
6.5.1 Mounting
template
=320=
=368=
700
57,5
57,5
57,5
57,5
17
40,5
50 min
50 min
50 min
• Drill the holes for the mounting screws using the drilling
template supplied with the appliance connector plate.
INSTALLATION