Introduction, 1 instructions guidance, 2 climapro – Glow-worm Climapro2 RF User Manual

Page 4: Rf description, 3 safety instructions and regulations

Advertising
background image

0020094581_01 - 08/10 - Glow-worm

- 2 -

INTRODUCTION

INTRODUCTION

1 Instructions guidance

1.1

Product documentation

The instructions are an integral part of the Climapro

2

RF and

must be handed to the user on completion of the installation in

order to comply with the current regulation.

• Carefully read the manual, to enable safe installation, use

and servicing. No liability can be accepted in the event

of damage for not complying with the guidance in this

instruction manual.

Associated documents

- User instructions

1.2

Explanation of symbols

e

DANGER: Risk of electric shock.

ATTENTION: Risk of damage to the Climapro

2

RF

or to its vicinity.

IMPORTANT: Useful information.

2 Climapro

2

Rf description

2.1

Regulation and statutory requirements

CE Mark

he CE mark indicates that the appliances described in this

manual are in compliance with the following directives:

- European Directive Num. 2004-108 of the European

Parliament and the Council regarding electromagnetic

compatibility

- European Directive Num. 2006-95 of the European

Parliament and the Council regarding low voltage

- Directive relating to telecommunications equipment (Council

of the European Community directive R&TTE 99/5/CEE).

2.2

Operational Diagram

The room thermostat communicates with a control unit via a

wireless connection.

1

2

3

4

Legend

1 Wall support for Climapro

2

Rf

2 Control unit

3 Room thermostat

4 batteries

3 Safety instructions and regulations

3.1

Safety instructions

All work inside Climapro

2

RF must be carried out by a qualified

professional or Glow-worm’s After-Sales Service.

Climapro

2

RF must only be installed by a qualified and

responsible professional.

Respect the basic safety instructions:

• Turn off the control unit’s power supply.

• When work on the appliance is completed, perform an

operational test and check for safety.

3.2

Regulations

During the installation and activation of the appliance, the

decrees, directives, technical regulations, standards and

clauses hereafter must be complied with in the versions that are

currently in force.

Advertising