Installation, 5 installation location, 6 climapro – Glow-worm Climapro2 RF User Manual

Page 6: Rf installation

Advertising
background image

0020094581_01 - 08/10 - Glow-worm

- 4 -

INSTALLATION

INSTALLATION

5 Installation location

• Explain the following requirements to the user.
Install Climapro

2

Rf:

- in a room protected from frost,
- on an interior wall of the main room in the home,
- at approximately 1.50 metres from the floor (according to the

regulations in force).

Do not install Climapro

2

Rf:

- near sources of heat, such as radiators, chimney walls,

televisions or solar radiation,

- above a cooker that is likely to give off steam and grease,

- on cold walls,

- between units or behind curtains or other objects that might

disturb temperature recording for the ambient air in the room,

- in a room that is heavily loaded with dust or where the

atmosphere is corrosive,

- near air currents that may come from doors or windows.

1500

6 Climapro

2

Rf Installation

All of the measurements in this chapter are expressed in mm.

6.1

Dimensions

6.1.1

Room thermostat

62.5

34

6

173

6.1.2

Wall support for Climapro

2

Rf

66

27

58

6

6.2

List of contents

- This list contains the following:

- Climapro

2

RF programmable room thermostat

- wall support for Climapro

2

RF

- packet containing 2 fixing screws with rawlplugs

- 4 “AA LR6 " alkaline batteries.

Advertising