Ultracom, 35 store, Read carefully before using – Glow-worm Ultracom2 35 Store User Manual

Page 6: Burner operation

Advertising
background image

0020112186_PROTO_10 - 01/11 - Glow-worm

- 4 -

READ CAREFULLY BEFORE USING

1.4 Benchmark

Glow-worm is a licensed member of

the Benchmark Scheme which aims to

improve the standards of installation and

commissioning of domestic heating and hot

water systems in the UK and to encourage

regular servicing to optimise safety,

efficiency and performance.

Benchmark is managed and promoted by

the Heating and Hotwater Industry Council.

• For more information visit

www.centralheating.co.uk

1.5 Quick reference guide

We designed this Quick reference guide

so that you can start using your appliance

right away.

This Quick reference guide assumes that

the appliance have been installed and

commissioned by a competent person.

If the central heating (C.H.) pressure falls

below 0.4 bar the display will flash the current

pressure

and below 0.3 bar

the boiler will not

operate, refer to fault finding section.

00201

12187_00 08/10

Carefully read the User Instructions before operating the boiler

Ultracom

2

35 Store

To ensure the continued efficient and safe operation of this appliance it is recommended

that it is serviced at regular intervals, service may be obtained through your installer, or from:

For Service & Repairs:

01773 828100

For Technical Help:

01773 828300

The draining, refilling and pressurising MUST be carried out by a

competent person approved at the time by the Health and Safety

Executive, contact your installer/service provider.

Green:

appliance on

ON / OFF

Yellow:

burner operation

Burner Operation

Flash red:

fault

Hot water

Temperature

controls

Domestic Hot water

Function Button/Indicator

Central Heating Function

Button/Indicator

Heating

Temperature

controls

Heating +

Domestic Hot Water

Heating only

Domestic

Hot Water only

If the appliance fails to reset and the

symbol displays, a further 2

attempts may be made. If fault

persists, contact your installer or

service provider.

Reset Symbol Displayed

Press the reset button.

xx

Lack of water

Symbol

If the CH pressure falls below

0.4 bar the display will flash the

current pressure and the boiler

will not operate. Contact your

installer/service provider.

ECO function

>3s

Boiler:

Advertising