Go Power! GP-SW1000 User Manual
Page 6
GPSW-1000/2000/3000
___________________________________________________________
6
3. Name and Main Function
3.1 Front view (GPSW3000 and GPSW2000)
a.
Ventilation Ports:
Do not obstruct, allow at least one inch for airflow.
b.
ON / OFF switch:
Power ON/OFF switch, leave in the OFF position during installation.
Leave in REMOTE position when using optional remote.
c.
Input Level:
Displays input voltage. Green indicates normal battery level, yellow
indicates mid to low battery level and red indicates under voltage.
d.
Load Level:
Displays AC load watts. Green indicates normal operation; yellow
indicates mid to high operation and red indicates overload levels.
e.
Status Level:
The LED display indicates the power status of the inverter; see section
0 5.0
Operation
for more information.
Solid Green:
AC power OK
Flashing Green
Power Saving Active
Fast Red Blink:
Over voltage protection (OVP)
Slow Red Blink:
Under voltage protection (UVP)
Intermittent Red Blink: Over temperature protection (OTP)
Solid Red: Overload protection (OLP)
a) Ventilation
b) On / Off switch
c) Input level
d) Load level
e) Status
f) Frequency
h) Strain relief clamp
g) Power save
i) AC outlets