GoDEX EZ1100Plus series - Manual (Page 31)

EZ1000 Plus User Manual
27
8. Pass the connection cable underneath the
other connection cables as shown in the
illustration.
【 Caution 】 Please make sure that you position all cables in such a way that they are not
damaged when you reassemble the printer.
9. Remove the cover from the opening for the
printer's antenna jack.
10. Put the antenna connector through the
antenna bracket and then through the
opening for the antenna jack as shown.
11. Put first the fixing plate and then the washer
on the antenna connector. Now secure
them with the nut.