GoDEX EZ1100Plus series - Manual (Page 34)

EZ1000 Plus User Manual
30
4-6. Instructions for using the CF card
Once the CF card adapter is installed, all EZ1000 Plus series printers will recognise the CF
card. If the printer's internal memory is not sufficient to store label formats, graphics or
fonts, you can use the CF card as an external memory to increase the storage capacity.
Please follow these instructions when using the CF card:
1. Remember to switch off the printer before installing the CF card or removing it
from the card slot.
2. The CF card must be formatted to FAT16 before you can use it as external
memory for the printer. When an unformatted CF card is detected, the printer
beeps three times and the STATUS indicator flashes orange.
3. To format the CF card, press the FEED button. The printer then formats the card
to FAT16. When formatting is complete, the LED indicator lights up green.
4. If you do not wish to format the CF card, open the print mechanism and close
it again to cancel the process.
5. Once formatting is complete, a folder "Godex" is created. This folder including
its content (formats, images and fonts) is managed by the printer. Do not edit
it manually.
6. The following CF cards are supported:
• CompactFlash Type I
• CompactFlash (CF) v1.4 specification
• Capacity: 128 MB–512 MB
• File system: FAT16