DigiTech RP1000 - Manual (Page 16)

12
Amp Loop using Guitar Amp’s Pre Amp
Connect the RP1000
Amp Loop Send to
the amp’s Input.
Connect the amp’s Loop
Send to the RP1000
Amp Loop Return.
Connect the RP1000
Line Out to the amp’s
Loop Return.
Connect your guitar
to the RP1000’s Input.
Amp/Mixer switch on 1/4"
outputs is set to AMP.
Amp Loop and Stomp Loop
Connect the
RP1000 Stomp Loop
Send to the stompbox Input.
Connect
the RP1000
Amp Loop
Send to the
amp’s Input.
Connect the
stompbox Output
to the RP1000
Stomp Loop
Return.
Connect the amp’s Loop
Send to the RP1000 Amp
Loop Return. Connect the RP1000
Line Out to the amp’s
Loop Return.
Connect your guitar
to the RP1000’s Input.
Amp/Mixer switch on 1/4"
outputs is set to AMP.