Inserting qr code, Inserting graphics – GoDEX QLabel-IV User Manual
Page 21
13: Inserting QR Code
1. Click
.
2.
Input data on the Number of encoded data box.
3.
Select rotated angle for QRCode setup.
4.
Select multiple numbers from 1 to 8.
5.
Select error correction level, mask factor, original or enhanced type and data mode character set.
14: Inserting Graphics
Insert graphics from file
1. Click .
2.
Select a halftoning of dithering you would like to create in a label.
3.
Input width, height you would like to have a graphic.
4.
On the Graphic dialog box, click Load.
5.
In the open dialog, go to “Look in”; select the file you would like to open.
6.
Click the label name, and then click “Open”.
7.
Alternatively, double-click the folder that contains the label you want to open.
8.
To insert graphics, click Graphic operate, click “Paste from clipboard”.
Notes.
z
Select download graphics to internal or external memory to enhance printer performance. Graphics in the
internal memory will be clear while printer turns off.
To erase graphics, please go to “Advance” toolbar, select “Clear Memory”, and then “Delete Graphics”.
z
Graphics would operate in rotate, flip, inverse color.
20