GoDEX QLabel-IV - Manual (Page 36)

Double click one of AI codes from the list, and then the Identifier of the AI code will be moved to the "AI" box on
the "ShowDataList" area. Input the data content on "DATA" box following the data format that displayed on
"Sample" box and then check the tick box on the right side of "DATA" box to complete the data input of AI code.
If the input data doesn't conform to the rule of the AI code and still check the tick box, then the "DATA" box will
turn to Red and cannot proceed to next set of AI code. In this case, please uncheck the tick box and then input
the data in correct format and check the tick box again to continue next AI data input.
35