Golden Blount Radco - Manual (Page 2)

*The gas fittings supplied are for what the factory considers a normal installation. Some installations may require a
longer connector tube or other fittings available at most hardware stores.
L.P. SETS MUST BE INSTALLED WITH GB SAFETY PILOT LIGHT KIT.
L.P. Gas sets are supplied with vermiculite instead of sand (item 7) and without (item 5) natural gas orifice.
18" - 21" and 24" Golden Blount Log sets are packed in 2 boxes. One box contains the logs and one box contains
the other component parts. 30" and 36" sets are packed in 3 boxes, 2 for logs and 1 for component parts.
Components Parts - For Natural Gas
ITEM
1. Damper Clamp
2. Log Grate
3. Gas Pan Burner
4. Cast Iron Burner Cap
5. Orifice
6. Aluminum Connector
7. Silica Sand
( Vermiculite supplied with L.P. sets)
8. Black Volcanic cinders
9. Glowing Embers w/hardware kit
10. Ceramic Logs
Number of logs per set varies with set size
MAINTENANCE: Removal of excess soot on
log surface can be performed by lightly brushing,
or carefully vacuuming soot with logs in place in
fireplace.
DO NOT REMOvE LOGS FROM
GRATE, AND DO NOT ExPOSE LOGS TO
WATER. On LP Gas models, periodically examine
area around burner, air mixer and pilot, remove any
lint or dirt.