GoldenEar Invisa HTR 7000 - Manual (Page 10)

GoldenEar Technology ► Invisa HTR 7000 Manual
Invisa® HTR 7000 Owner’s Manual
10
7. Loosen the four rotating lock arms on the speaker by turning the arm screws on the front of the speaker
counterclockwise 1 /
2
to 1 turn, just enough to allow the lock arm to move freely (Figure 4).
• Make sure the rotating lock arms are positioned inwards (Figure 5) so that your speaker fi ts into
your cutout hole.
8. Holding the speaker’s front lip with your thumbs and index fi ngers, carefully slip the speaker into
the cutout and hold fi rmly in place. (Figure 6).
LOCK ARM (4)
TUCKED IN PRIOR TO
INSTALLING SPEAKER
IN-WALL/CEILING.
LOCK ARM SCREWS (4).
TURN COUNTER-
CLOCKWISE TO
LOOSEN.
Figure 4 Figure 5
Figure 6