Hall Research URA-XT - Manual (Page 14)

Model URA, URA-SKU, & URA-XT
12
300 ft of CAT6 (1280x1024 source)
* actual zoomed photo of screen * After skew adjustment
Figure 7 – Example of Skew manifested
3.5 Skew Adjustment Procedure
This procedure applies to URA-SKU and URA-XT models only.
 Press the SEL button once to enter the adjustment. Press
the SEL button again to light only one of the 3 RGB LED’s.
As you press SEL the Red, Green, and Blue LED’s will
light up one at a time.
 Press the ▲/▼ buttons to move the selected color
component to the left and right. Pressing both buttons at
the same time resets all skew adjustments.