Dynex DX-26L150A11 - Manual (Page 2)

2
 If you are using cable connected directly to the TV:
1. Press MENU. The on-screen menu opens.
2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens.
3. Press ◄ or ► to select Cable.
4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan.
 If you are using an antenna:
1. Press MENU. The on-screen menu opens.
2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens.
3. Press ◄ or ► to select Antenna.
4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan.
2. I am programming my universal remote, what code is needed?
 Use the following table to obtain the correct remote code:
o Note: The brand name is often visible on the front of the universal remote control, and the
model number is often visible on the back.
o Note: If the universal remote control isn’t listed in the chart, refer to your universal remote
control’s instructions and try codes for other brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8 RCA
RCU807 One for
All
URC-
6690 Sony
RM-VL600
115 135 0464 8043
Set-top box manufacturer and model
Comcast
M1057 Dish
Network
VIP508,
VIP622 Motorola
DRC800 TIVO
Series 3, HD DirecTV
RC23
0463 720 0463 0091 10463
o Codes for other universal remotes are available online at:
http://www.dynexproducts.com/universalcontrolcodes.aspx
 Follow your universal remote control’s instructions to enter the code.