Hall Research CNT-IP-2 - Manual (Page 15)

CNT-IP-2
15
4.4.4.1.2 Communications Tab
The communications configuration page is used for the Network, Mode,
Serial communications and External Device settings.
DHCP
Enables or Disables DHCP. When DHCP is enabled, the users network
router assigns the IP address to the device through which it can be
controlled. When DHCP is disabled, the user must specify the desired IP
address, subnet mask and gateway address.
IP Address
Only used when DHCP is disabled and in a static IP address configuration.
This field specifies the static IP address.
Subnet Mask
Only used when DHCP is disabled and in a static IP address configuration.
This field specifies the subnet mask.
Gateway
Only used when DHCP is disabled and in a static IP address configuration.
This field specifies the gateway address.
Primary DNS
Only used when DHCP is disabled and in a static IP address configuration.
This field specifies an optional primary DNS server address.