Hanna Instruments HI 3512 User Manual

Page 61

Advertising

Data transmission from the instrument to the PC can be done with the
HI 92000 Windows

compatible software (optional).

HI 92000 also

offers graphing and on-line help feature.
Data can be exported to the most popular spreadsheet programs for
further analysis.
To connect your instrument to a PC, use an USB cable connector. Make
sure that your instrument is switched off and plug one connector to the
instrument USB socket and the other to the serial or USB port of your PC.

Note: If you are not using Hanna Instruments HI 92000 software,

please see the following instructions.

SENDING COMMANDS FROM PC

It is also possible to remotely control the instrument with any terminal
program. Use an USB

cable to connect the instrument to a PC, start the

terminal program and set the communication options as follows: 8, N, 1,
no flow control.

COMMAND TYPES

To send a command to the instrument follow the next scheme:

<command prefix> <command

> <CR>

where:

<command prefix> is the 16 ASCII character
<command> is the command code.

Note: Either small or capital letters can be used.

SIMPLE COMMANDS

KF1

Is equivalent to pressing

function key 1

KF2

Is equivalent to pressing

function key 2

KF3

Is equivalent to pressing

function key 3

RNG

Is equivalent to pressing

RANGE key

CAL

Is equivalent to pressing

CAL key

UPC

Is equivalent to pressing the

UP arrow key

DWC

Is equivalent to pressing the

DOWN arrow key

MNU

Is equivalent to pressing

MENU key

ESC

Is equivalent to pressing

ESC key

PC INTERFACE

Advertising