Hanna Instruments HI 904 - Manual (Page 39)

3-3
USER INTERFACE
3 USER INTERFACE
3.1 Start Up
Once the instrument is assembled and installed, follow the steps below to start the titrator:
• Connect the instrument to a power outlet with the supplied power adapter.
• Turn on the titrator using the power switch located on the back of the instrument.
• Wait until the titrator finishes the initialization process.
• Press when prompted or wait a few seconds for titrator to start.
Note: All the performed initialization processes must be successfully completed. If one of
the processes is terminated by a
“Failed” message, restart the titrator using the power
switch. If the problem persists, contact your sales representative.