Hanna Instruments HI 2222 - Manual (Page 22)

22
Setup mode allows viewing and modification of the following parameters:
• Calibration Expiration Alarm
• Current Time (hour & minute)
• Current Date (year, month & day)
• Beep Status
• Instrument ID
• Temperature Unit
To enter the Setup mode press the SETUP key while the instrument is in
measuring mode. Press SETUP key to exit SETUP mode.
Select a parameter with the ARROW keys.
Press the CAL key to change a parameter value. The selected parameter
will start blinking.
Press the RANGE key to toggle between the displayed parameters.
Press the ARROW keys to increase or decrease the displayed value.
Press the CFM key to save the modified value or the CAL key to escape
without saving.
CALIBRATION EXPIRATION ALARM
CALIBRATION EXPIRATION ALARM CALIBRATION EXPIRATION ALARM CALIBRATION EXPIRATION ALARM CALIBRATION EXPIRATION ALARM
Press the CAL key when the calibration expiration is displayed. Calibration
time out (“OFF” or “1” to “7” days) will begin blinking.
Press the ARROW keys to change the calibration expiration value.
Press the CFM key to save the modified calibration expiration value or
press the CAL key to cancel without saving the calibration expiration.
CURRENT TIME
CURRENT TIME CURRENT TIME CURRENT TIME CURRENT TIME
Press the CAL key when the current time is displayed. The hour will
start blinking.
Press the ARROW keys to change the hour.
Press the RANGE key. The minutes will start blinking.
SETUP SETUP SETUP SETUP SETUP