Hanna Instruments HI 2222 - Manual (Page 24)

24
IIIIINSTRUMENT ID NSTRUMENT ID NSTRUMENT ID NSTRUMENT ID NSTRUMENT ID
Press the CAL key when “InId” is displayed. The instrument ID (“0000”
to “9999”) will begin blinking.
Press the ARROW keys to change the instrument ID value.
Press the CFM key to save the modified instrument ID value or press the
CAL key to cancel without saving the instrument ID.
Note: The instrument ID is downloaded to a PC as part of a logged data
set to identify it’s origin.
TEMPERATURE UNIT TEMPERATURE UNIT TEMPERATURE UNIT TEMPERATURE UNIT TEMPERATURE UNIT
Press CAL when “tenP” is displayed. The temperature unit will start
blinking.
Press the ARROW keys to change the option.
Press CFM to save the modified temperature unit.
Press CAL to escape without saving.