Dialogic M7324 - Manual (Page 84)

Dialogic
®
PBX Integration Board User’s Guide
4. Exit Programming Mode.
For more information, see the Mitel Superswitch manuals.
Phone-Side Programming
SX-200 and SX2000 PBXs and Mitel Superset 430 Emulation:
Personal Key 10 should store the MWI OFF feature access code and Personal
Key 11 should store the MWI ON feature access code (see
Figure 9 ).
1. Connect the extension (that will be connected to the Dialogic
®
PBX
Integration Board) to a Mitel Superset 430 phone. Repeat the steps for all
extensions that would be connected to the board.
2. On a Superset 430 phone, press the SuperKey.
For SX-200 PBXs and a SuperSet 430 phone:
a) Press the More soft-key.
b) Press Feature Key soft-key.
c) Press the desired personal key (either 10 or 11).
d) Press Change soft-key.
e) Press Speed Call soft-key.
f) Enter the MWI Feature Access code (for key 10 – MWI OFF, for 11-
MWI ON).
g) Press the Save soft-key.
h) Press the Superkey.
84