Heath Consultants Personal Surveyor (PS200 Series) - Manual (Page 74)

6-2
USER HANDBOOK
2) Charging up to five (5) instruments in the 5-Way
Charger (Part No. 64138) supplied complete with
universal PSU (Part No. 64299).
3) Using the 12V / 24V - USB Vehicle Charging Adaptor
(Part No. 64248).
In all three options:
Once the instrument is connected to the charger, charging
will commence automatically.
During charging, the battery symbol and ‘CHARGING’
indication flashes in the display. Maximum recharge duration
is 4 hours allowing minimum instrument run times.
On completion of charging, the ‘full’ battery symbol is
displayed together with ‘CHARGED’ indication.
The instrument will not be damaged if left connected to the
charger.
6.1.1 Recharge Instrument using the Charging /
Comms Clip
The charging / comms clip (Part No. 64260), together with
the cable (supplied with Mains Adaptor), enables the
instrument battery to be charged by connecting the instrument
to any of the following power sources:
- 5v USB Mains Adaptor (Part No. 64247)
- USB port of a Personal Computer (PC) or Laptop
- 12V / 24V - USB Vehicle Adaptor (Part No. 64248)
The clip is easily connected to the instrument charging contact
pads and features a mini-USB socket to enable connection
of mini-USB charging / comms cable with a standard type
USB connector at the other end.
To connect charging / comms clip to the instrument, push