HITEC ENERGY SPORT ESC SERIES - Manual (Page 10)

ACCELERATION: Soft, Normal and Hard [CONT.]
3. Wait 2 seconds. You will hear 4 groups of two fast beeps. After this,
groups of 4 varying beeps, tones and melodies will sound.
4. When you hear “VV VV VV VV”, you are at the Soft Acceleration
setting. If this is the setting you would like to use, pull the throttle
stick to the lowest, “OFF” position or;
5. When you hear “V V V V”, you are at the Normal Acceleration
setting. If this is the setting you would like to use, pull the throttle
stick to the lowest, “OFF” position or;
6. When you hear “VVV VVV VVV VVV”, you are at the Hard
Acceleration setting. If this is the setting you would like to use, pull
the throttle stick to the lowest, “OFF” position.
7. The sound will stop indicating you have finished programming
this function and your settings are saved.
• Soft:
Recommended setting for airplanes or helis with gear drive systems.
• Normal:
Recommended setting for airplanes with gear drive systems.
• Hard:
Recommended setting for direct drive systems.
HELI GOVERNOR MODE: Off/Mode 1/Mode 2
1. Turn on your radio and set the throttle stick to the top, full “ON”
positon (100%).
2. Plug the battery pack into your controller.
3. Wait 2 seconds. You will hear 4 groups of two fast beeps. After this,
groups of 4 varying beeps, tones and melodies will sound.
4. When you hear _*_ _*_ _*_ _*_, you are now in the Heli Mode Off
program setting. If you do not want to use the Heli Mode, pull the
throttle stick to the lowest, “OFF” position or;
5. When you hear _**_ _**_ _**_ _**_, you are now in the Heli
Mode 1 program setting. If this is the setting you would like to use,
pull the throttle stick to the lowest, “OFF” position or;