HITEC ENERGY SPORT ESC SERIES - Manual (Page 7)

BATTERy TyPE: NiCd/NiMH/LiPo [CONT.]
3. Wait 2 seconds. You will hear 4 groups of two fast beeps. After
this, 4 varying beeps, tones and melodies will sound.
4. When you hear ~ ~ ~ ~, it indicates you are in the Battery Type
menu NiCd/NiMH selection. If this is your battery choice, pull the
throttle stick to the lowest, “OFF” position or;
5. When you hear ~~ ~~~~ ~~, it indicates you are in the Battery
Type menu LiPo selection. If this is your battery choice, pull the
throttle stick to the lowest, “OFF” position.
6. The sound will stop, indicating you have finished programming
this function and your settings are saved.
LOW VOLTAGE CUTOFF: Low 2.8v/50%, Med. 3.0v/60%, High 3.2v/65%
1. Turn on your radio and set the throttle stick to the top, full “ON”
positon (100%).
2. Plug the battery pack into your controller.
3. Wait 2 seconds. You will hear 4 groups of two fast beeps. After
this, groups of 4 varying beeps, tones and melodies will sound.
4. When you hear *_ _* *_ _* *_ _* *_ _*, it indicates you are in the
Low Voltage Cutoff Threshold menu, Low 2.8V/ 50% setting. If
this is the cutoff voltage you want to use, pull the throttle stick to
the lowest, “OFF” position or;
5. When you hear *_ _ _* *_ _ _* *_ _ _* *_ _ _*, it indicates you
are in the Low Voltage Cutoff Threshold menu, Medium 3.0V/60%
setting. If this is the cutoff voltage you want to use pull the throttle
stick to the lowest, “OFF” position or;
6. When you hear *_ _ _ ¬_* *_ _ _ _* *_ _ _ _* *_ _ _ _*, it indicates
you are in the Low Voltage Cutoff Threshold menu, High 3.2V/65%
setting. If this is the cutoff voltage you want to use, pull the throttle
stick to the lowest, “OFF” position.
7. The sound will stop, indicating you have finished programming
this function and your settings are saved.