Imaxrc B606-AC-PRO - Manual (Page 3)

B606 Pro Intelligent digital balance Charger
Operating Manual
Special features……………………………………………………………………………………….... 01
Performance parameter……………………………………………………………………………… 02
Exterior and accessories……………………………………………………………………………… 02
Key features……………………………………………………………………………………………….. 02
Operating instructions…………………………………………………………………………..…….03
Warning and error messages……………………………………………………………………….11
Safety messages…………………………………………………………………………………………..12
After-sale service and guarantee………………………………………………………………….12
This charger employs an advanced charging calculation and design which allow multilayer error to be compatible. It can
create a safe charging condition and maximum reduce the danger caused by negligence or setting error of user
This item adopt prevalent Synchronous buck & boost converter technology, this makes conversion efficiency up to 90%
Accept all types of R/C batteries: LiPo, Lilo, LiFe, NiMH, NiCd, Pb
Simple and efficient user interface makes operation easy, with powful function and abundant content. Real-time shows
you the battery voltage charger current temperature of batteries capacity of charge/discharger elapsed time input
voltage etc., therefore, you can inquire the present state and establish various safety-limited parameters conveniently.
This charger employs an individual-cell-voltage balancer to maintain you pack in balance while charging/discharging.
During the process, it can monitor and balance each cell of the pack individually (Tolerance: +_0.01V)
Accept individual battery charging/discharging, so you can extend the scope of application of the charger. That is equally
useful for the DIY battery.
Various of charging mode to meet different demand: charging-auto/balance charging/fast charging/storage and cyclic
charging etc.
For users convenience it can store and load maximum five data of different batteries. You can establish the data contains
program setting of the battery to charge or discharge continually. Three data can be called out at any time you need and the
process can be executed without program setting.
Perform 1-5 cycles of charge>discharge or discharge>charge continually for NiMH/NiCd refreshing
You can connect a high-precision digital temperature sensor to protect the charger works in a safety temperature. Once
a battery reaches the maximum temperature you set during charge/discharge, the process will be terminated to protect the
battery. This is very important for NiMH/NiCd ( separately purchased temperature sensor)
For technical expert, this charger offers PC based program can analysis the characteristic of the battery by USB port. It
shows a graph of voltage, current, capacity and temperature curves and it also shows the individual voltage of each cell in
the Lithium battery pack.
*Separate purchased program kit(Ev-xxxA series)