Dell fi-412PR - Manual (Page 12)

8 |
2.3. Operation Test
After installing the Imprinter, check if the printing
operation can be done in the Offline Print Test mode of the
scanner.
1. While pressing the [Function] button on the
operator panel, press the button.
Continue pressing the [Function] button.
2. Release the [Function] button when the Function
Number Display changes from [P] to [b].
3. Place a blank document into the ADF paper
chute .
ATTENTION
ƒ Use A4 or Letter size paper. If the size is
smaller than A4 or Letter, printing may not
complete successfully.
ƒ Confirm that the Print Cartridge is
positioned within the document width.
4. Press [Scan] button to test.
Ö The paper will feed into the ADF, and the Imprinter
will print out the Print Test Characters starting at
5mm from the paper’s edge
HINT
Print Test Patterns
Test Pattern 1 (Horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test Pattern 2 (Horizontal）:
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test Pattern 3 (Horizontal):
!”#$%&()*+,-./0123456789:;<=>?@00000000
Test Pattern 4(Vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test Pattern 5 (Vertical):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test Pattern 6 (Vertical):
!”#$%&()*+,-./0123456789:;<=>?@00000000
When multiple sheets of documents are placed in the
ADF, the Test Print repeats patterns from 1 through 6.
The numbering data portion ”00000000” changes from
0 (Zero) with increment of 1(one).
(One test pattern is printed at a time. Press the [Scan]
button to continue printing the next test pattern.)
5. To stop Offline Print test mode, press the
button. The scanner will switch off.
5mm
c d e f g h
Feeding direction
Print Test Sample
Function Function
Function
Send to
Scan
Function Number Display