Dual XHDR6435 - Manual (Page 28)

28
Bluetooth
®
Operation (BTM60)
XHDR6435 OPERATION
The BTM60 Bluetooth module (sold separately) supports A2DP (advanced audio
distribution profile) wireless streaming audio from your Bluetooth mobile device directly
to your head unit. You can also control your music from the front panel of the head unit
using AVRCP (audio video remote control profile).
Notes:
• To stream music to your head unit, your mobile device must support A2DP and AVRCP
Bluetooth profiles. Check the owner's manual of your mobile device
• Streaming audio must be enabled from your mobile device. This option will vary
depending on the device. Some devices allow streaming audio to be disabled.
After pairing, connecting and enabling streaming audio from a compatible mobile device,
begin playing music using the music player on your mobile device. Once the music is
playing, the following functions can be used to control music:
• The
ll
button will skip to the next available audio track.
• The nn button will skip to the previous audio track.
• The
l
/ II button will toggle between play and pause during playback.
• The button will stop the audio playback.
Note: Some Bluetooth devices may not fully support these commands.
Bluetooth Reset
Resetting the Bluetooth module will remove the list of paired phones and delete the list of
recent calls from memory.
To reset the BTM60's Bluetooth feature, perform the following steps:
1) Press MODE until the head unit is in Bluetooth mode.
2) Press and hold MODE for 3 seconds to reset the Bluetooth settings back to the factory
default.
Bluetooth Streaming Audio Operation
(Bluetooth Audio Mode)