Setting up, Your instant backstop, Terminology – JUGS Sports Instant Backstop User Manual

Page 2: Instant backstop

Advertising
background image

5. Put one end of the folding Support Pole into one

of the two grommets at the bottom of the INSTANT

BACKSTOP

®

.

Place the strap from the Slipcover into

the metal buckle attached to the grommet. For indoor

use only, please attach Crutch Tip to bottom of Support

Pole once the Support Pole is through the grommet.

5

3. The INSTANT BACKSTOP

®

should now be lying flat on

the ground in a 9-foot circle.

3

1. Grasping the edge of the net frame, remove screen from

carrying bag and remove the elastic retention strap.

1

9. The Support Pole with Slipcover must be on the inside

of the INSTANT BACKSTOP

®

frame at all points.

9

Always inspect your INSTANT BACKSTOP

®

before each use. Do not use the INSTANT BACKSTOP

®

if it shows signs of excessive wear or damaged components.

4. Put folding Support Pole together at its maximum

length of 25 feet. Slide blue Slipcover over

assembled folding Support Pole.

4

2. Holding the net frame together, toss away from your

body onto a clear, level area.

2

8. With two people, one on each side, raise the INSTANT

BACKSTOP

®

to an upright position. NOTE: The bottom

of the INSTANT BACKSTOP

®

must be spread to its

maximum width to stand properly.

8

SETTING

UP

your

INSTANT

BACKSTOP

®

6. Attach the Support Pole with Slipcover to the sides

and top of the INSTANT BACKSTOP

®

with the 15

Velcro

®

Straps.

10. With two people, one on each side, pull the Red Straps at

the front of the INSTANT BACKSTOP

®

to a 45° angle to the

ground. When both Red Straps are tight and the INSTANT

BACKSTOP

®

is upright, attach the end of the Red Straps

to the floor with Suction Cups and Tethers. If outdoors, use

Threaded T-Handle Pegs to secure Red Straps to ground.

10

6

7. Place the other end of the Support Pole into the other

grommet. Place the strap from the Slipcover into the

metal buckle attached to the grommet. For indoor use

only, please attach Crutch Tip to bottom of Support

Pole once the Support Pole is through the grommet.

7

11. Secure the D-Rings on both sides of INSTANT

BACKSTOP

®

using Suction Cups and Tethers. If

outdoors, use Threaded T-Handle Pegs to secure

D-Rings to ground. Your INSTANT BACKSTOP

®

is

now ready for use.

11

Support Pole

Slipcover

Frame

TERMINOLOGY

Velcro

®

Loops

Slipcover with

Folding Support Pole

Net Frame

Net

Red Strap

D-Ring

Metal Buckle

Grommet
Crutch Tip

Velcro

®

Loops

Red Strap

Metal Buckle

D-Ring

Grommet

Crutch Tip

INSTANT BACKSTOP

®

SUPPORT

POLE

SLIP COVER

ELASTIC

RETENTION STRAP

THREADED

T-HANDLE

PEG

CARRYING BAG

SUCTION CUP

TETHER

CRUTCH TIPS

Advertising