Kipp&Zonen 2AP Sun Tracker - Manual (Page 15)

INSTALLATION AND SETUP
14
Figure 3.5: Communication and Power Cable Wiring.
Figure 3.6: Power Cable Connector
Important: Circuit breaker
A power on/off switch is not a part of the 2AP, requirements for electrical equipment installed
outdoors specify that:
• A power isolator (switch or circuit-breaker) must be included in the cable installation.
• The isolator must be in close proximity to the equipment and within easy reach of the
operator.
• The isolator must be marked as the power disconnection device for the equipment.