Dodge 2009 Challenger SRT8 - Manual (Page 84)

Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say
ЉHelpЉ following
the beep. The uconnect
௡ phone will play all the options at
any prompt if you ask for help.
To activate the uconnect ௡ phone from idle, simply press
the PHONE button and follow the audible prompts for
directions. All uconnect
௡ phone sessions begin with a
press of the PHONE button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
ЉCancelЉ and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) uconnect ௡ phone to a Cellular Phone
To begin using your uconnect
௡ phone, you must pair
your compatible Bluetooth ௡ enabled cellular phone.
To complete the pairing process, you will need to refer-
ence your cellular phone Owner’s Manual. The
uconnect
௡ website may also provide detailed instructions
for pairing.
The following are general phone to uconnect
௡ phone
pairing instructions:
• Press the PHONE button to begin.
• After the ЉReadyЉ prompt and the following beep, say
ЉSetup Phone Pairing.Љ
• When prompted, after the beep, say ЉPair a PhoneЉ and
follow the audible prompts.
• You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE