Connecting the ipod, Using this feature – Dodge 2009 Challenger SRT8 User Manual

Page 220

Advertising
background image

UCI supports Mini, 4G, Photo, Nano, 5G iPod

௡ and

iPhone

௡ devices. Some iPod௡ software versions may not

fully support the UCI features. Please visit Apple’s
website for software updates.

NOTE:

• If the radio has a USB port, connecting an iPod௡ to this

port does not play the media. For playing an iPod

௡,

use the separate 16–pin connector port located in the
center console.

• Connecting an iPod௡ to the AUX port located in the

radio faceplate, plays media, but does not use the UCI
feature to control the connected device.

Connecting The iPod

Use the optional connection cable to connect an iPod

௡ to

the vehicle’s 16–pin connector port located on the center
console. Once the iPod

௡ is connected and synchronized

to the vehicle’s UCI system (iPod

௡ may take a few

seconds to connect), the iPod

௡ starts charging and is

ready for use by pressing radio switches, as described
below.

NOTE:

• You may have to remove the connector pin protection

cap from the 16–pin connector port, prior to connect-
ing the cable.

• If the iPod௡ battery is completely discharged, it may

not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod

௡ connected

to the UCI system may charge it to the required level.

Using This Feature
By using the optional connection cable to connect an
iPod

௡ to the vehicle’s UCI 16–pin connector port:

• The iPod௡ audio can be played on the vehicle’s sound

system, providing metadata (artist, track title, album,
etc.) information on the radio display.

218

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising
This manual is related to the following products: