Konig Electronic Zoom spotting scope - Manual (Page 2)

2
ENGLISH
20 ~ 60 x 60 mm Spotting Scope
User instructions
(1) For stable viewing it is recommended to mount the spotting scope on a tripod. Align spotting scope
with object to be viewed.
(2) Rotate focusing ring until a clear picture is obtained.
(3) Rotate zoom ring to the desired zoom level. Refine focus as needed.
(4) Use sliding hood (sunshade) when needed.
WARNING:
Viewing the sun with this instrument can result in blindness or other serious eye damage
which may be permanent.
Maintenance
• Storage: When not in use, store your spotting scope with the protective caps on in a moisture free
environment. Avoid touching the lenses with your fingers.
• Cleaning: Blow away any dust or debris on the lenses or use a soft lens brush. To remove dirt or
fingerprints, clean with a soft cotton cloth, rubbing in a circular motion from center outward.
Unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. For a
more thorough cleaning, photographic-type lens cleaning fluid may be used. Always apply the fluid to
the cleaning cloth; never directly to the lens.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.