LA Audio BCL20 - Manual (Page 4)

3
2.0 INSTALLATION 2.0 INSTALLATION
IMPORTANT: PLEASE READ THIS SECTION BEFORE USING THE BCL20 IMPORTANT: PLEASE READ THIS SECTION BEFORE USING THE BCL20
2.1 INSPECTION AND UNPACKING 2.1 INSPECTION AND UNPACKING
The BCL20 has been carefully packed at our factory in a carton
designed to withstand handling in transit. Should the unit appear
to have been damaged in transit notify your dealer immediately
and do not discard any of the packing. The carton should
contain -
• The BCL20 unit
• Power cord
• Operator Manual (this book)
2.2 OPERATING ENVIRONMENT 2.2 OPERATING ENVIRONMENT
The BCL20 is designed to operate between 0 and 50°C (32-
122°F) with relative humidity no more than 80%. Should the unit
be installed in an equipment rack, ensure that the ambient
temperature conforms to these levels.
2.3 CE STANDARDS AND THE LOW VOLTAGE DIRECTIVE (LVD) 2.3 CE STANDARDS AND THE LOW VOLTAGE DIRECTIVE (LVD)
The BCL20 has been designed to meet the latest
Electromagnetic Compatibility (EMC) regulations. However we
recommend you do not operate the unit close to strong emitters
of electromagnetic radiation such as power transformers,
motors, mobile telephones or radio transmitters.
The unit should only be connected to a power supply of the type
described in 2.4 POWER REQUIREMENTS or as marked on the
unit. The unit must be earthed for safe operation. Disconnect the
mains supply before removing the cover.
2.4 POWER REQUIREMENTS 2.4 POWER REQUIREMENTS
There is a mains fuse located inside the unit which is accessed
by removing the cover. This fuse is for protection against unit