LA Audio BCL20 - Manual (Page 6)

5
BCL20 rear view showing Channel 2 and Mains connections
The input and outputs of the BCL20 are on XLR connectors. For
balanced input and outputs, connections to the unit should be
wired as follows:
XLR +4dBu Pin 1 Screen (Signal ground)
Pin 2 Hot (+ve)
Pin 3 Cold (-ve)
For unbalanced operation join pins 1 and 3 on either input or
output.
The 'Side chain' connectors are on ¼ inch TRS jacks and are
wired as follows
TRS jack Tip Send
Ring Return
Sleeve Screen (signal ground)
3 WARRANTY 3 WARRANTY
Your LA Audio BCL20 has been manufactured to a high
standard using quality components. If correctly installed and
operated the unit should give years of problem free operation.
However in the event of a defect in material or workmanship
causing failure of the unit within one year of the date of original
purchase we will agree to repair, or at our discretion replace,
any defective item without charge for labour or parts. To receive
service under this warranty it is necessary to return the unit to
an LA Audio authorised service centre or to the factory with a
dated receipt as proof of purchase. After repair the unit will be
returned to you free of charge.
Limitations: Limitations:
This warranty does not cover damage resulting from accident or
misuse. The warranty is void unless repairs are carried out by
an authorised service centre. The warranty is void if the unit has
been modified other than at the manufacturers instruction. The
warranty does not cover components which have a limited life,
and which are expected to be periodically replaced for optimal
performance. We do not warrant that the unit shall operate in
any way other than as described in this manual.