LA Audio DLX200 - Manual (Page 22)

22
Utilities 2 - Preset
Format
Mono or Stereo.
TO RECALL A PRESET:
• Ensure that any current unsaved settings are stored.
• Press [Recall].
• Use knob F1 to select a preset.
• Press [Recall] to select the preset, and [Recall] again if you’re certain.
Base presets “Mono” and “Stereo” are stored in locations 1 and 2 respectively. Pressing any other
button will cancel the operation.
TO STORE A PRESET:
• Set the unit as desired.
• Press [Store].
• Use knob F1 to select a preset location.
• Use knobs F2 (characters) and F3 (cursor) to create a preset name.
• Press [Store] to write to the preset location.
Storing will overwrite any existing settings stored in the selected preset location. Base presets in
locations 1 and 2 cannot be overwritten.
TO CHANGE MONO/STEREO FORMAT:
• Navigate past the last channel (or before the first) to Utilities page 2.
• Use knob F1 to select mono or stereo mode.
Selecting stereo mode will copy the settings from the left side to the right.
TO SET DELAY:
Distance (m) Delay (ms)
10 29.4
50 147.1
100 294.1
• Navigate to the desired channel.